10 Foot Length 3/4″ Hydraulic Return Hose. Made by Gates, p/n 12RLA-30R2. Recommended for low-pressure hydraulic oil return lines for general purpose water, glycol antifreeze solutions, conveying diesel fuel, gasoline or air. Meets SAE 30R2 performance requirements of both Type 1 and Type 2 for fuel and B20 constant contact up to +125 Deg F biodiesel fuel transfer applications.Meets Flame Resistance Acceptance Designation MSHA 2G.Temperature Range: -40 Deg F to +212 Deg F (-40 Deg C to +100 Deg C); Up to +160 Deg F (+ 71 Deg C) for air. For water emulsions see Temperature Limits Table.Recommended Couplings: GLP CouplingsGLX Couplings. Get it here and save a ton of cash. We sell this hose in 10 foot increments. Enter the quantity you need per 10 feet. Ex. 1=10 feet, 2=20 feet, 3=30 feet, etc
MM R16
PERFORMANCE CHARACTERISTICS
AGR | Cross-Sectional Shape Style | Round |
AARX | Inside Diameter | 0.727 inches minimum and 0.773 inches maximum |
ABJH | Temp Rating | -40.0 deg fahrenheit single response and 212.0 deg fahrenheit single response |
ABKV | Outside Diameter | 1.062 inches minimum and 1.125 inches maximum |
CQBD | Burst Test Pressure | 500.0 pounds per square inch single response |
CQCS | Layer Composition and Location | 1ST layer molded rubber ERR-100 |
CQCS | Layer Composition and Location | 2ND layer woven fabric ERR-100 |
CQCS | Layer Composition and Location | Outer layer molded rubber ERR-100 |
CQGM | Maximum Operating Pressure | 250.0 pounds per square inch single response |
CRJM | Outer Covering Environmental Protection | Oil resistant and ozone resistant |
CRWL | Inside Surface Condition | Smooth |
CRXX | Measuring Method and Length | 120.000 inches nominal excluding end fittings |
MATT | Material | Rubber synthetic tube |
MEDA | Media for Which Designed | Water single response |
Reviews
There are no reviews yet.