New, 4720-01-485-0416, AM General, Hummer Rear Winch Hose, TACOM, 12469436, FB6087-01, FB6004-01, T2
MRC | Parameter | Characteristics |
---|---|---|
AAGR | Cross-Sectional Shape Style | Round |
AAJD | Thread Class | 2B 1ST end |
AAJF | Thread Direction | Right-hand 1ST end |
AARX | Inside Diameter | 0.312 inches nominal |
ABJH | Temp Rating | -40.0 deg fahrenheit and 300.0 deg fahrenheit single response |
ABKV | Outside Diameter | 0.656 inches minimum and 0.695 inches maximum |
ACKH | Minimum Inside Bending Radius | 1.250 inches |
AGAV | End Item Identification | Nha 12469389;END item 2320-01-413-3739;HMMWV |
AHNC | Connection Style | Swivel nut flare 1ST end |
AKUU | End Connection Design | Elbow 1ST end |
AKXL | End Fitting Component and Material | Complete fitting steel all ends |
AKXM | Fitting Component and Surface Treatment | Complete fitting zinc 1ST end |
AWLS | Connection Type | Threaded internal tube 1ST end |
CQBD | Burst Test Pressure | 6000.0 pounds per square inch |
CQGM | Maximum Operating Pressure | 1500.0 pounds per square inch |
CQJX | Nominal Thread Size | 0.562 inches 1ST end |
CQRB | Seat Angle | 37.0 degrees 1ST end |
CRFY | Flow Angle | 45.0 degrees 1ST end |
CRWL | Inside Surface Condition | Smooth |
CRXX | Measuring Method and Length | 152.440 inches minimum working and 155.560 inches maximum working |
CXCY | Part Name Assigned BY Controlling Agency | Hose assembly |
FEAT | Special Features | Inner conveying tube material-rubber, synthetic |
MEDA | Media for Which Designed | Fuel/oil, hydrocarbon and hydraulic fluid, water base single response |
THSD | Thread Series Designator | Unf 1ST end |
ZZZK | Specification/Standard Data | Sae J516, table 4E-81343 national std/spec |
4720-01-485-0416 Features
Reviews
There are no reviews yet.