2520-01-474-3901, HMMWV Axle Shaft, Half shaft, AM General, EX4855-2, 10068552, 12460369-5, 299-0070, 2990055, Fits passenger side, 2WH2C
2520-01-474-3901 Features
MRC | Parameter | Characteristics |
---|---|---|
AAUB | Hole Diameter | 0.430 inches minimum and 0.450 inches maximum |
ABHP | Overall Length | 29.770 inches minimum and 30.240 inches maximum |
AGAV | End Item Identification | Nsn 2320-01-412-0143 truck, utility – hum-V |
AHTC | Flange Outside Diameter | 2.948 inches minimum and 2.952 inches maximum |
AMDM | First End Spline Length | 3.210 inches minimum and 3.250 inches maximum |
AMGA | Second End Spline Length | 3.210 inches minimum and 3.250 inches maximum |
AMGB | Second End Spline Minor Diameter | 1.282 inches nominal |
AMGC | Second End Spline Major Diameter | 1.375 inches nominal |
AMGF | Second End Pitch Diameter | 0.071 inches minimum and 0.073 inches maximum |
AMHF | Second End Gear Outside Diameter | 1.375 inches nominal |
AMQA | First End Type | Flanged |
AMQF | Second End Type | Splined |
AXHR | Mounting Facility Type and Quantity | 6 unthreaded hole |
BNTH | Second End Gear Teeth Quantity | 32 |
BNTJ | Second End Gear Teeth Pressure Angle in DEG | 45.0 |
BNTM | Second End Spline Type | Involute |
BNTN | Second End Spline Pressure Angle in DEG | 45.0 |
BNYS | Flange Overall Thickness | 0.303 inches minimum and 0.355 inches maximum |
BNYT | Flange Thickness at Mounting Hole | 0.180 inches minimum and 0.200 inches maximum |
FEAT | Special Features | Item for right hand only; surface hardness rockwell C 58-63 – core hardness rockwell C 35 max; mat’l for boot clamp – stainless steel, type 304 iaw astm A167 |